Attention!
I have a large amount of hard to find Crate / Ampeg amplifier and speaker parts. Most are from the the mid 90’s to the mid 2000’s. Handles, feet, knobs, fuses, foot switches, input jacks and mixing board parts. If you need a part that doesn’t appear on the partial list above please send me an E-mail.
Read More
Amp
SVTCL
SVT2PRO
The SVTCL has two output impedance’s 4 ohms and 2 ohms. Mix and match the
4 ohms and 2 ohms. Mix and match the concert system or pair a SVT4X10HE with
a SVT1X15E for a versatile 4 or 2 ohm system.
Compatible cabinets
1 or 2 – SVT8X10E
1 or 2 – SVT2X15E
1 or 2 – SVT4X10HLF
2 or 4 – SVT4X10HE
2 or 4 – SVT1X15E
1 or 2 – BSE4x10HLF
1 or 2 – BXT410 or 115HL4’s
Amp
SVT350H
B2R
The SVT350H and the B2R have two output impedance’s and two different wattage’s:
8 ohms @ 200 W…4 ohms @ 350 W
The solid state output allows large and small system versatility.
Compatible Cabinets:
1 – SVT8X10E
1 – BSE410HLF
1 – SVT4X10HLF
1 or 2 – SVT4X10HE
1 or 2 – SVT1X15E
Amp
SVT4PRO
SVT5PRO
B4R
Power and flexibility is the SVT4PRO’s forte. The PR & BXT series cabinets crave the
1200 or 1000 watts mono bridged @ 4 ohms. 1200 or 1000 watts mono bridged @ 4 ohms.
For the ultimate concert system, envision eight 8 ohm Classic Series cabinets or four
4 ohm Classic Series cabinets. Wired either full range or bi-amp. The combinations
never end. PLEASE READ THE MANUAL!
Compatible Cabinets:
ALL AMPEG CABS.
A MUST FOR THE BXT & PR SERIES.
Amp
SVT3PRO
The SVT3PRO has two output impedance’s and two different wattage’s:
8 ohms @ 275 W…4 ohms @ 450 W. The closest thing there is to a SVTCL at 35lbs.!!!!
This amp loves 4 ohms. It shines with the SVT4X10HLF and growls with the SVT8X10E.
Compatible Cabinets:
ALL CLASSIC CAB’S
BSE410HLF
back to the top
SPECS
AMP: SVTCL
OUTPUT TYPE: ALL TUBE
OUTPUT POWER: 300 WATTS @ 2 or 4 ohms
AMP: SVT350H and B2R
OUTPUT TYPE: SOLID STATE
OUTPUT POWER: 350 WATTS @ 4 or 8 ohms
AMP: SVT4PRO
OUTPUT TYPE: TUBE PRE AMP, SOLID STATE X’s 2 POWER AMPS
OUTPUT POWER:
POWER AMPS A&B/ WIRED MONO BRIDGED 800/1200 WATTS @ 8 /4 ohms
IMPORTANT!!! Neutric connector wired 1+ 2+ must be used to mono bridged SVT4PRO
POWER AMPS A&B 275/400/600 WATTS @ 8/4/2 ohms.
AMP: SVT3PRO
OUTPUT TYPE: TUBE PRE AMP, TUBE DRIVEN SOLID STATE POWER AMP
OUTPUT POWER: 275/450 WATTS @ 8 or 4 ohms
AMP: B4R and SVT5PRO
OUTPUT TYPE:SOLID STATE
OUTPUT POWER:
POWER AMPS A&B/ WIRED MONO BRIDGED 600/1000 WATTS @ 8/4 ohms
IMPORTANT B4R !!!!! Banana plug must be used and positive and negative terminals must be
wired in a specific order.
IMPORTANT SVT5PRO!!! Neutric connector wired 1+ 2+ must be used to mono bridged SVT5PRO
POWER AMPS A&B 175/300/450 WATTS @ 8/4/2 ohms
CABINET POWER RATINGS
SVT410HLF CLASSIC, SVT810E CLASSIC, and SVT215E CLASSIC: 400 WATTS RMS
SVT410HE CLASSIC and SVT15E CLASSIC: 200 WATTS RMS
BXT410HL4 BXT Series BXT: 600 WATTS RMS
BXT115HL4 Series BXT: 400 WATTS RMS
PR410HLF PR Series PR: 600 WATTS RMS
BSE410HLF Series BSE: 400 WATTS RMS
Read More