DanaMusic.Com

Ampeg Compatibility chart

Specs

Power ratings

Ampeg Compatibility chart

Amp

SVTCL

SVT2PRO

The SVTCL has two output impedance's 4 ohms and 2 ohms. Mix and match the
4 ohms and 2 ohms. Mix and match the concert system or pair a SVT4X10HE with
a SVT1X15E for a versatile 4 or 2 ohm system.

Compatible cabinets

?1or 2 -- SVT8X10E
?1or 2 -- SVT2X15E
?1or 2 -- SVT4X10HLF
?2 or 4 -- SVT4X10HE
?2 or 4 -- SVT1X15E
?1or 2-- BSE4x10HLF
?1or 2 -- BXT410 or 115HL4's

back to the top

Amp

?SVT350H
B2R

The SVT3 & the B2R have two output impedance's and two different wattage's:
8 ohms @ 200 W...4 ohms @ 350 W
The solid state output allows large and small system versatility.

Compatible Cabinets:

?1 -- SVT8X10E
?1-BSE410HLF
?1 -- SVT4X10HLF
?1 or 2 -- SVT4X10HE
?1 or 2 -- SVT1X15E
back to the top

Amp

?SVT4PRO
?SVT5PRO
?B4R

Power and flexibility is the SVT4PRO's forte. The PR & BXT series cabinets crave the
1200 or 1000 watts mono bridged @ 4 ohms. 1200 or 1000 watts mono bridged @ 4 ohms.
For the ultimate concert system, envision eight 8 ohm Classic Series cabinets or four
4 ohm Classic Series cabinets. Wired either full range or bi-amp.The combinations
never end. PLEASE READ THE MANUAL!!!!!!!!!!

Compatible Cabinets:

ALL AMPEG CABS.
A MUST FOR THE A MUST FOR THE BXT & PR SERIES.

Back to the top

Amp

?SVT3PRO

The SVT3PRO has two output impedance's and two different wattage's:
8 ohms @ 275 W...4 ohms @ 450 W. The closest thing there is to a SVTCL at 35lbs.!!!!
This amp loves 4 ohms. It shines with the SVT4X10HLF and growls with the SVT8X10E.

Compatible Cabinets:

?ALL CLASSIC CAB'S
?BSE410HLF

back to the top

AMP: SVTCL

OUTPUT TYPE: ALL TUBE

OUTPUT POWER: 300 WATTS @ 2 or 4 ohms

OUTPUT TYPE: SOLID STATE

OUTPUT POWER: 350 WATTS @ 4 or 8 ohms

back to the top

AMP: SVT4PRO

OUTPUT TYPE: TUBE PRE AMP, SOLID STATE X's 2 POWER AMPS

OUTPUT POWER:
POWER AMPS A&B/ WIRED MONO BRIDGED 800/1200 WATTS @ 8 /4 ohms
IMPORTANT!!! Neutric connector wired 1+ 2+ must be used to mono bridged SVT4PRO
POWER AMPS A&B 275/400/600 WATTS @ 8/4/2 ohms.

Back to the top

OUTPUT TYPE: TUBE PRE AMP, TUBE DRIVEN SOLID STATE POWER AMP

OUTPUT POWER: 275/450 WATTS @ 8 or 4 ohms

AMP: B4R and SVT5PRO

OUTPUT TYPE:SOLID STATE

OUTPUT POWER:

POWER AMPS A&B/ WIRED MONO BRIDGED 600/1000 WATTS @ 8/4 ohms
IMPORTANT B4R !!!!! Banana plug must be used and positive and negative terminals must be
wired in a specific order.
IMPORTANT SVT5PRO!!! Neutric connector wired 1+ 2+ must be used to mono bridged SVT5PRO
POWER AMPS A&B 175/300/450 WATTS @ 8/4/2 ohms

back to the top

SVT410HLF CLASSIC, SVT810E CLASSIC, and SVT215E CLASSIC: 400 WATTS RMS

SVT410HE CLASSIC and SVT15E CLASSIC: 200 WATTS RMS

BXT410HL4 BXT Series BXT: 600 WATTS RMS

BXT115HL4 Series BXT: 400 WATTS RMS

PR410HLF PR Series PR: 600 WATTS RMS

BSE410HLF Series BSE: 400 WATTS RMS

back to the top